ACTUATOR SELECTION
Define operation and loss-of-air requirements
Double-acting or spring-return
A double-acting actuator uses air for both directions of travel. A spring-return actuator uses spring force for its return direction. Neither description by itself establishes fail-open or fail-close operation for the complete valve and control circuit. Specify the required air-loss position and confirm the proposed arrangement, mounting orientation and control sequence.
Instrument air and torque review
Provide the minimum available instrument air pressure at the actuator during operation, together with air quality, filtration, moisture and treatment requirements. Review actuator sizing against valve opening, closing and seating torque at the maximum project differential pressure; spring-return duties also require review of the return stroke.
Installation and assembly scope
Confirm the flange standard, face-to-face dimensions, pipe bore and disc clearance. Include the actuator mounting interface, shaft/coupling details, orientation, installation space, maintenance access and site environment. If requesting an actuator alone, identify that scope and provide the existing valve drawing and torque information.
CONTROL PACKAGE
Confirm accessories for the ordered configuration
- On/off or modulating duty: state operating frequency, desired opening/closing time, control method and signal requirements.
- Solenoid valve: specify the control sequence and any required electrical supply, coil and site requirements for review.
- Limit switch box: define end-position indication, feedback contacts and the control-system interface.
- Positioner: identify positioning duty, command and feedback requirements if modulating control is needed.
- Loss-of-air response: state fail-open, fail-close or another required sequence, and identify signal-loss behavior separately.
These are procurement inputs, not standard-equipment promises. Air pressure, actuator torque, stroke time, brand, environmental protection, certification and accessory availability must be confirmed for the specific valve, actuator and control package.